SATA bus speed
SAS/SATA ports
Physical and virtual drive
support
Firmware
Compatible devices
Cabling
Redundant configuration
Enclosure management
Enclosure support
Array Performance Features
Host data transfer rate
Drive data transfer rate
Maximum scatter/gather
Maximum size of I/O requests
Maximum queue tags per
drive
Strip size
Maximum concurrent
commands
Support for multiple initiators
Performance
Intel® Integrated RAID Module RMS2AF040 and RMS2AF080 Hardware User's Guide
Specification
Table 5. Array Performance Features
Specification
Upto 5.0 Gigabit/sec per PCI Express* lane
Upto 6 Gigabit/sec per lane
80 elements
6.4 Mbytes in 64 Kbyte stripes
As many as the drive can accept
8, 16, 32, or 64 KB
1024 - 16
Yes
Native command queuing
®
Intel
Integrated RAID Module RMS2AF040 and
RMS2AF080
Upto 6 Gbps per port, point-to-point
4 internal ports, 16 devices
Up to 64 physical drives including up to 16 physical drives in
up to 16 RAID arrays per controller.
Drives not configured as part of a RAID array can be
configured as "pass through" drives in Non-RAID mode.
16 MB in reflashable flash ROM
•
.5-inch and 3.5-inch SAS or SATA II drives including SSD
drives
•
Non disk devices including expanders
•
Can support drives of mixed capacity
Small thin cables that do not restrict airflow and Shared
connectors for multiple drives
32 KB NVRAM and config-on-disk (COD)
In-band and out-of-band SES2; out-of-band SGPIO
Assumes one SEP per enclosure
®
Intel
Integrated RAID Module RMS2AF040 and
RMS2AF080
21