Table of Contents
Advertisement
01GB00CDA9886M.book Page 26 Monday, March 17, 2008 4:05 PM
Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the XM mode,
and then press
/ENT.
1
*
Bluetooth
General
4
HD Radio
*
Bluetooth
1
*
Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
2
*
Only when XM Radio is connected.
3
*
Only when SIRIUS Radio is connected.
4
*
Only when HD Radio is connected.
3
Press
/ENT to activate the XM ADF mode.
4
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (refer to the "Changing the Display" section
on page 25.).
5
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing
/ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
26
-EN
01GB05CDA9886.fm
2
3
*
*
Display
XM
/SIRIUS
/ENT.
USB memory (Optional)
SOURCE/
/
Controlling USB memory (Optional)
A USB memory device may be connected to this unit. With a USB
memory device connected to this unit, the audio files will be playable
from this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory device containing MP3/WMA/AAC,
these files are playable on this unit.
1
Press SOURCE/
to switch to the USB mode.
1
TUNER
XM/SIRIUS*
DISC
4
Bluetooth Audio*
CHANGER*
1
*
Only when XM Radio or SIRIUS Radio is connected.
2
*
Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to "Setting the AUX+ Setup Mode" (page 20).
3
*
Displayed only when the AUX+ Setup is set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
4
*
Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
5
*
Only when the CD changer is connected.
2
To pause playback, press
Pressing
/
again will resume the playback.
• The root folder is displayed as "ROOT" in the Folder Name Search
mode.
• This unit plays back files in the USB memory with the same controls
and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to "CD/MP3/WMA/AAC" on pages 10 to 13.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
ALPINE CDA-9886M 68-12118Z86-A (EN)
2
3
USB
iPod*
/AUX+*
5
TUNER
/
.
Advertisement
Table of Contents
