HighPoint ATA-133 RAID User Manual page 34

RAID Administrator
Within this interface:
SMTP Server:
Port:
Administrator:
Notification Option:
2. Make sure the Enable mail Notification
required information and set the notification option, then press the
button to finish.
User can test if the setting is correct by clicking the
saving the setting.
Refresh
When user click on this tab, the software will scan the computer system for any updated
system information, like if there is any new hard disk plugged, or if there is any connected
disk is failed.
After clicking on this tab, the software will automatically switch to the
screen, here user can find the updated system information after scanning.
Type in the domain name or IP address for the SMTP
server that you will use to send email.
Type in the port of the SMTP service on the email server.
Type in the email address where the notification
information will be sent to.
Select what kind of events that you want the software to
notify.
item is checked, then type in the
Save
Test button before
System View
3-10