HighPoint ATA-133 RAID User Manual page 12

Raid controller
Table of Contents

Advertisement

Introduction
5. In the follow-up window, select
or HPT372 UDMA/ATA 133 RAID
6. In the follow-up window, click on Continue Anyway, then click Finish in the
follow-up window;
7. Next, Windows will find HighPoint RCM device, please confirm the Digital
Signature Not Found window when it appears, when finished, please
restart the computer.
Install driver during Windows XP installation
1. Booting from CD-ROM, when the Windows XP Setup blue screen appears
and prompt user to press F6 key to install third party SCSI or RAID driver,
please press F6 Key.
2. The setup program will continue, later when the setup program prompt user if
to specify additional adapters, please press S key;
3. Then the setup program will prompt user to insert the driver diskette. Please
insert the driver diskette, then press ENTER to continue;
4. The follow-up window will list out the installation choices, please select
HPT370/372/372A ATA RAID Controller
TER to continue;
5. The follow-up window will list out the devices to be installed, in which
HPT370/372/372A ATA RAID Controller
want to install other devices, please operate at this time. If all devices have
been successfully installed, please go to next step.)
6. Press ENTER to continue Windows XP setup.
Verify Installation
After the driver has been installed and the computer restarted:
1. Right-click
My Computer
menu;
2. In the popup window, select
button.
HPT370 UDMA/ATA100 RAID Controller
Controller, then click Next to continue;
for Windows XP and press EN
item should be included; ( If user
icon, then select Properties item from the popup
Hardware
tab and then click
Device Manager
1-8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hpt370Hpt372

Table of Contents