Frame Covers Removal - KYMCO MYROAD 700i Service Manual

2
. FRAME COVERS/
EXHAUST MUFFLER

FRAME COVERS REMOVAL

SEAT
REMOVAL
Unlock the seat with the ignition key.
Open the seat.
Remove the two nuts and seat damper unit.
Remove the two nuts and the seat.
INSTALLATION
Installation is in the reverse order of the
removal.
After installation, check the seat installation
by moving the seat.
LUGGAGE BOX REMOVAL
After removal the seat, side cover, carrier,
body cover, then you can remove the luggage
box.
Remove the screws and bolts.
Raise the luggage box, disconnect the
luggage box light and accessory socket
connectors.
INSTALLATION
Installation is in the reverse order of removal.
2-3
Damper Unit
Nuts
Screws
Accessory Socket Connector
Luggage box light Connector
MYROAD 700i
Nuts
Nuts
Bolts