KYMCO GRAND DINK 125 Service Manual page 101

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Install the clutch outer.
Hold the clutch outer with the universal
holder.
Install and tighten the clutch outer nut.
Torque: 49.0 58.8kg-m
Special
Universal Holder
Install the drive belt. ( 8-7)
Install the left crankcase cover. ( 8-3)
KICK STARTER
REMOVAL
Remove the left crankcase cover. ( 8-3)
Remove the seal rubber and dowel pins.
Remove the kick lever.
Remove the circlip and washer from the kick
starter spindle.
Gently turn the kick starter spindle to remove
the starter driven gear together with the
friction spring.
Remove the kick starter spindle and return
spring from the left crankcase cover.
Remove the kick starter spindle bushing.
8-15
GRAND DINK 125/150
Clutch Outer
Kick Lever
Kick Starter Spindle
Starter Driven Gear
Friction Spring
Return Spring
Kick Starter Spindle