Table of Contents
Advertisement
To add a box to a diagram
1
Drag the Box icon
from the Diagram set of the objects toolbox to the design view.
In the Box tab of the Box Inspector, do any of the following:
2
Enter text in the Text box. In the design view, you can also enter text directly in the box by clicking in the box and
•
typing the text.
Select Single Line to constrain the text to a single line.
•
Select Resize with Text to resize the box to fit the text.
•
•
Click an Align button to align the text.
Enter width and height values for the margins within the box.
•
Select font options for text: Bold, Italic, or both.
•
•
Specify the location of any image you want to appear in the box, and select Size to Image to size the box to fit the
image.
In the Graphics tab of the Box Inspector, do any of the following:
3
•
Specify the color and line width of the border of the design box.
Specify the fill color of the design box.
•
Specify the color and font size of the text.
•
4
Specify how to apply the settings:
Default Settings
Uses the current settings for all subsequent boxes.
Apply To All
Applies the current settings to all existing boxes.
To change the curve of a link line
You can make link lines straight or deflect them from a straight line (curve them) to any degree and in either
direction.
1
Select the line.
Do one of the following:
2
Drag the line's selection rectangle
•
•
In the Link Inspector, choose a percentage from the Deflection menu. Positive percentages increase the deflection
to the right, negative percentages to the left. (Right and left are from the perspective of the source page—the page
that the link arrow points away from.) A deflection of zero produces a straight line.
Note: When two pages are linked by two lines, giving the lines a zero deflection merges the lines. This effect is likely to
obscure the design.
in the direction you want its deflection to increase or decrease.
ADOBE GOLIVE CS2
194
User Guide
Advertisement
Chapters
Table of Contents
