Table of Contents
Advertisement
Do one of the following tasks:
5
If you're creating a version control workspace on the local hard drive, enter a name for the project, enter a user
•
name, and reference a folder on the local hard drive in the Directory box (don't reference the site folder—the folder
in which GoLive creates a version control workspace must be separate from the site folder).
If you're creating a version control workspace on an FTP server, specify the server in the Server box, and specify
•
a user name, password, directory, and project in the Access Data section. Click Advanced to set advanced FTP
options.
6
Set options as desired.
Click OK.
7
To create a GoLive version control workspace for a new site
Choose File > New, and select Site > Create Site.
1
You can also connect to an existing GoLive version control workspace: Choose Site > Connect To Site in the New
dialog box.
2
In the Site Creation Wizard, choose Blank Site.
Follow the on-screen instructions until GoLive displays the Use A Version Control System window. Select Use
3
Version Control.
4
Choose one of the following options from the Version Control System menu:
Directory in File System to create a version control workspace on the local hard drive.
•
FTP Server to create a version control workspace on an FTP server.
•
Do one of the following tasks:
5
If you're creating a version control workspace on the local hard drive, type a name for the project in the Project
•
box and reference a folder on the local hard drive in the Directory box (don't reference the site folder—the folder
in which GoLive creates a version control workspace must be separate from the site folder).
If you're creating a version control workspace on an FTP server, specify the server in the Server box, and specify
•
a user name, password, directory, and project name. Click Advanced to set advanced FTP options.
Click Next, and follow the on-screen instructions to complete the site creation.
6
To perform an initial check-in
Once you've created a version control workspace, you must check in all the site files to the version control workspace.
1
Choose Site > Version Control System > Check In All.
In the Version Control File Checkin dialog box, select the files you want to check in and click Check In (to use
2
version control for the entire site, select all files).
To check out a file
Select a file and do one of the following:
•
Choose Site > Version Control System > Check Out.
Click the Check Out button
•
in the Version Control toolbar.
ADOBE GOLIVE CS2
152
User Guide
Advertisement
Chapters
Table of Contents
