Selected Channel Section - Yamaha LS9 Quick Start Manual

Selected Channel Section

The Selected Channel section on an LS9 console corresponds to the channels modules on a traditional analog console,
providing access to all of the main parameters for the currently selected channel� The channel to be controlled is selected by
pressing it's [SEL] key� Head amp gain, EQ, dynamics, pan/balance, mix and matrix bus send level, and other parameters can
be controlled via the encoders and keys on the panel�
● Module Comparison
Analog Mixer Channel
Module
Note:The analog channel module shown is from the MG4/14 mixer, but since it does not have the same number of AUX and EFF controls as the LS9 it should be referred to only as an example.
4
LS9 Selected Channel
Section
LS9 Channel
Module Section
The parameters
for the channel
selected via the
[SEL] keys appear
on the display�
The Selected Channel section encoders and keys control the parameters that
appear in this section of the display. This includes head amp gain, EQ, two
different dynamics thresholds, panning/balance, and other controls
corresponding to those in the upper section of the analog console channel
module shown to the left. The HPF can be controlled via the display only.
The channel module controls the parameters shown
in this section of the display. This corresponds to
the lower section of the analog console channel
module, shown to the left.
The Selected Channel section is located
to the right of the LCD panel.