Selecting, Editing, And Saving Effects - Yamaha LS9 Quick Start Manual

Selecting, Editing, and Saving Effects

If you position the cursor at a mounted effect unit in the VIRTUAL RACK GEQ/EFFECT display and press the [ENTER] key,
the EFFECT pop-up window will open�
Move the cursor to the parameter you want to edit and use the dial or INC/DEC keys to edit it as required�
There are two ways to change the effect type�
Click the effect icon to open the EFFECT TYPE pop-up window. You can
then click one of the effect icons that appears to select the corresponding
effect.
Effects you have edited can be store in effect library numbers 058 ~ 199� Effect library numbers 001 ~ 057 are read-only�
Rev-X reverb programs can be recalled from library numbers 046 ~ 048�
If you select a unit in rack space 1 ~ 4 the EQ edit
display will open when you press the [ENTER] key.
If you select an effect unit that has been mounted
in rack space 5 ~ 8 the effect edit display will open,
but if you select an EQ unit that has been mounted in
rack space 5 ~ 8 the EQ edit display will open when
you press the [ENTER] key.
Click the LIB button in the upper
area of the EFFECT window
to open the EFFECT LIBRARY
pop-up window. Use the dial to
select an effect from the list that
appears in the pop-up window.
You can click the
[RECALL] button to
load the selected
effect. Edited effects
can also be saved
to the library via this
pop-up window.
Recall the effect you
want to use.
7