Onkyo TX-NR1007B Instruction Manual page 71

Listening to the Radio—Continued
When tuned to an RDS station that's broadcasting text information, the text can be displayed.
Displaying Radio Text (RT)
RT/PTY/TP
Press the [RT/PTY/TP] button
once.
The RT information scrolls across the
display.
Notes:
• The message " " may appear while the AV
Waiting
receiver waits for the RT information.
• If the message " No Text Data
no RT information is available.
Finding Stations by Type (PTY)
PRESET
RT/PTY/TP
You can search for radio stations by type.
1 Press the [RT/PTY/TP] button
twice.
The current program type appears on
the display.
2
Use the PRESET [ ]/[ ] buttons
to select the type of program you
want.
See the table on page 70.
" appears on the display,
/
ENTER
3
To start the search, press
[ENTER].
The AV receiver searches until it finds
a station of the type you specified, at
which point it stops briefly before con-
tinuing with the search.
4 When a station you want to listen
to is found, press [ENTER].
If no stations are found, the message
"Not Found" appears.
Listening to Traffic News (TP)
RT/PTY/TP
You can search for stations that broadcast traffic news.
1 Press the [RT/PTY/TP] button
three times.
If the current radio station is broadcast-
ing TP (Traffic Program), "[TP]" will
appear on the display, and traffic news
will be heard as and when it's broad-
cast. If "TP" without square brackets
appears, this means that the station is
not broadcasting TP.
2
To locate a station that is broad-
casting TP, press [ENTER].
The AV receiver searches until it finds
a station that's broadcasting TP.
If no stations are found, the message
"Not Found" appears.
ENTER
71