Basic Operations; Selecting The Input Source - Onkyo TX-NR1007B Instruction Manual

Basic Operations

Selecting the Input Source

This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Input selector buttons
1
AV receiver
2
3
AV receiver
or
4
62
MASTER VOLUME
Use the AV receiver's input selector buttons to select the input
Remote
controller
source.
To select the input source with the remote controller, press the
[RECEIVER] button, and then press the INPUT SELECTOR but-
tons.
or
Start playback on the source component.
When you select DVD or another video component, on your TV, you'll need
to select the video input that's connected to the AV receiver's HDMI outputs,
COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
To adjust the volume, use the MASTER VOLUME control, or the
remote controller's VOL [ ]/[ ] button.
Remote
The volume can be set to –
controller
play).
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See "Volume
Setup" on page 105.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 76.
dB, –81.5 dB through +18.0 dB (relative dis-
INPUT
SELECTOR
RECEIVER
VOL /