BENDIX TU-FLO 700 COMPRESSOR Manual page 33

Technical
Bulletin No.: TCH-008-022
Additional Cold Weather Operation Tips for the Air Brake System
Subject:
Last year we published Bulletin PRO-08-21 which provided some guidelines for "winterizing" a vehicle
air brake system. Here are some additional suggestions for making cold weather vehicle operation
just a little more bearable.
Thawing Frozen Air Lines
The old saying; "Prevention is the best medicine" truly applies here! Each year this activity accounts
for an untold amount of unnecessary labor and component replacement. Here are some Do's and
Don'ts for prevention and thawing.
Do's
1. Do maintain freeze prevention devices to prevent road calls. Don't let evaporators or injectors run
out of methanol alcohol or protection will be degraded. Check the air dryer for proper operation
and change the desiccant when needed.
2. Do thaw out frozen air lines and valves by placing the vehicle in a warmed building. This is the
only method for thawing that will not cause damage to the air system or its components.
3. Do use dummy hose couplings on the tractor and trailer.
4. Do check for sections of air line that could form water traps. Look for "drooping" lines.
Don'ts
1. Do not apply an open flame to air lines and valves. Beyond causing damage to the internal
nonmetallic parts of valves and melting or burning non-metallic air lines. WARNING: THIS
PRACTICE IS UNSAFE AND CAN RESULT IN VEHICLE FIRE!
2. Do not introduce (pour) fluids into air brake lines or hose couplings ("glad hands"). Some fluids
used can cause immediate and severe damage to rubber components. Even methanol alcohol,
which is used in Alcohol Evaporators and Injectors, should not be poured into air lines. Fluids
poured into the system wash lubricants out of valves, collect in brake chambers and valves and
can cause malfunction. Loss of lubricant can affect valve operating characteristics, accelerate
wear and cause premature replacement.
3. Do not park a vehicle outside after thawing its air system indoors. Condensation will form in the
system and freeze again. Place the vehicle in operation when it is removed to the outdoors.
Supporting Air and Electrical Lines
Make certain tie wraps are replaced and support brackets are re-assembled if removed during routine
maintenance. These items prevent the weight of ice and snow accumulations from breaking or
disconnecting air lines and wires.
Automatic Drain Valves (System without Air Dryer)
As we stated last year, routine reservoir draining is the most basic step (although not completely
effective) in reducing the possibility of freeze-up. While automatic drain valves relieve the operator of
draining reservoirs on a daily basis, these valves MUST be routinely checked for proper operation.
Don't overlook them until they fail and a road call is required.
Appendix B: Continued
Bulletin
Effective Date: 1/1/1994 Page: 1 of 1
33