Product Identification - Desa SDVBND Owner's Operation And Installation Manual

Cast iron stove and direct-vent (freestanding fireplace heater) burner system for civfc/pscivfc/vcis/pvcis/vh series stoves

Hide thumbs

Table Of Contents

Table of Contents

SAFETY INFORMATION

Continued

Carefully supervise young children when they are in the room

with stove.

Do not modify the burner or stove under any circumstances. Any

parts removed for servicing must be replaced prior to operating

stove or burner system.

Turn burner system off and let cool before servicing, install-

ing, or repairing. Only a qualified service person should in-

stall, service, or repair the stove or burner system. Have burner

system inspected annually by a qualified service person.

You must keep control compartments, burners, and circulat-

ing air passages clean. More frequent cleaning may be needed

due to excessive lint and dust from carpeting, bedding mate-

rial, pet hair, etc. Turn off the gas valve and pilot light before

cleaning stove or burner system.

10. Have venting system inspected annually by a qualified service

person. If needed, have venting system cleaned or repaired.

See Cleaning and Maintenance, page 29.

11. Keep the area around your stove clear of combustible materi-

als, gasoline, and other flammable vapor and liquids. Do not

run burner system where these are used or stored. Do not place

items such as clothing or decorations on or around stove.

12. Do not use this stove to cook food or burn paper or other objects.

13. Never place anything on top of stove.

14. Do not use any solid fuels (wood, coal, paper, cardboard, etc.)

in this stove. Use only the gas type indicated on burner system

nameplate.

15. This appliance, when installed, must be electrically grounded

in accordance with local codes or, in the absence of local codes,

with the National Electrical Code, ANSI/NFPA 70, or the Ca-

nadian Electrical Code, CSA C22.1.

16. Do not obstruct the flow of combustion and ventilation air in

any way. Provide adequate clearances around air openings into

the combustion chamber along with adequate accessibility

clearance for servicing and proper operation.

17. Do not install stove directly on carpeting, vinyl tile, or any com-

bustible material other than wood. The stove must set on a metal

or wood panel extending the full width and depth of the stove.

18. Do not use stove or burner system if any part has been ex-

posed to or under water. Immediately call a qualified service

person to arrange for replacement of the unit.

19. Do not operate burner system if any log is broken.

20. Do not use a blower insert, heat exchanger insert, or other ac-

cessory not approved for use with this stove.

21. Do not operate burner system with glass door removed, cracked,

or broken.

22. Provide adequate clearances to air openings.

For more information, visit www.desatech.com

112126-01B

SAFETY INFORMATION