NAPCO XP-400 Using Instruction page 13

Hide thumbs Also See for XP-400:
Table of Contents

Advertisement

Keypad Beeps or
SYSTEM Flashes
2 Beeps
ARMED
READY
2 Beeps
SYSTEM
2 Beeps
3 Beeps
ZONE 1
ZONE 2
ZONE 3
ZONE 4
4 Beeps
7 Beeps
Oi220a
page 13
Zone light
System Trouble
ON
Condition
1
Bell / Siren Trouble There is a problem with the Bell or Siren. Call installing com-
pany for service.
3
Wireless Receiver
A problem has been detected with the wireless receiver.
Trouble
Call installing company for service.
4
Wireless Receiver
A problem has been detected with a wireless receiver.
Jam
Call installing company for service.
1-4
Wireless
The battery in a wireless transmitter is low and should be re-
Transmitter Low
placed. This transmitter is on the zone corresponding to the
Battery
number of the lit zone light. The replacement battery for the
GEM-Trans2 door/window transmitter, GEM-PIR motion de-
tector and GEM-GB glass break detector is the Duracell
DL123A. (2 required for the GEM-PIR and GEM-GB.) The
GEM-DT Dual Technology Sensor requires 4 C-Cell Duracell
MN1400 Alkaline batteries.
Warning: Replace batteries only with the same type as speci-
fied above. Use of another battery may present a risk of fire or
explosion. Do not recharge or disassemble battery, or dispose
of in fire.
1-4
Wireless
A problem has been detected with a wireless transmitter.
Transmitter
Call installing company for service
Supervisory Failure
1-4
Zone Trouble
Call installing company for service.
System Troubles
Action
13
Tuesday, September 16, 1997 08:30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express xp-400Express series

Table of Contents