Switch Panel Area - Scotsman C2648 - SERVICE MANUAL 11-2010 Service Manual

C2648 Service Manual - Installation

Switch Panel Area

There is standard front access to two switches – on
and off.
Status De-Scale
Power Water
To switch the machine OFF, push and release the
Off button. The machine will shut off at the end of
the next cycle.
To switch the machine ON, push and release the
On button. The machine will go through a start up
process and then resume ice making.
Control Options
There are two optional, field installed controls that
can be on this machine.
•
KVS Adjustable ice level control
•
KSBU Advanced Feature control
Off
On
Maximum Ice
Minimum Ice
Level
November 2010
Page 18
Adjustable ice level control (optional)
When this option is present there is an adjustment
knob and an additional indicator light to the right of
the four standard indicator lights. The ultrasonic ice
level control allows control of the point that the ice
machine stops making ice. Reasons for this
include:
•
Seasonal changes in ice used
•
Planning to sanitize the bin
•
Faster turnover for fresher ice
Use of adjustable ice level control
Vari-Smart Control Area
There are several positions the ice level can be
set to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit's
instructions for complete details.
Adjust Ice Level
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the Bin Full indicator light next to the
adjustment knob will be On.
Note: Ice will build up in the bin at an angle, the
distances controlled will be from the sensor to the
top of the ice directly beneath it.
The actual distance between the highest point of
the ice may be closer or further away, depending
upon the angle of the ice.
Bin
Full
Adjust Ice Level
02-4294-01 Rev. A.
Bin
Full