Installation Clearances - Vanguard VI33NR VI33PR Owner's Operation And Installation Manual

Unvented (vent-free) gas fireplace insert
Hide thumbs Also See for VI33NR VI33PR:
Table of Contents

Advertisement

INSTALLATION
Continued
6. Align screw holes in side panels with holes in top panel (see
Figure 9). Insert and tighten #10 Phillips screws.
7. Reinstall louver removed in step 4.
8. Carefully inspect fireplace surround assembly. Make sure each part
fits properly. Firmly tighten all screws installed during assembly.
CAUTION: Do not overtighten. Metal can bend,
warp, or break under excessive strain.
9. Install trim after final finishing and/or painting of wall.
Top Surround
Panel
Phillips
Screws (4)
Figure 8 - Attaching Top Surround Panel
Figure 9 - Attaching Side Panels to Top Panel
INSTALLING HOOD
Install hood to top of firebox as shown in Figure 10. Use 5 Phillips
screws, provided, to attach hood to fireplace insert and 2 Phillips
screws, provided, to attach hood and surround sides to fireplace insert.
For more information, visit www.desatech.com
For more information, visit www.desatech.com
111285-01B
Top Edge of
Fireplace Insert
Top Panel
Phillips Screws
Side Panel
Installing Surround Kit (Cont.)
Screws
Figure 10 - Installing Hood to Firebox

INSTALLATION CLEARANCES

WARNING: Maintain the minimum clearances. If
you can, provide greater clearances from floor, ceil-
ing, and adjoining wall.
Carefully follow the instructions below. This will ensure safe
installation.
Minimum Clearances For Side Combustible
Material, Side Wall, and Ceiling
A. Clearances from the side of the fireplace cabinet to any com-
bustible material and wall should follow diagram in Figure 12,
page 10.
Example: The face of a mantel, bookshelf, etc. is made of
combustible material and protrudes 3
combustible material must be 4" from the side of the fireplace
opening (see Figure 11).
B. Clearances from the top of the fireplace opening to the ceiling
should not be less than 42 inches.
Example
*Minimum 16 inches from Side Wall
Figure 11 - Minimum Clearance for Combustible to Wall
INSTALLATION
Installing Hood
Installation Clearances
1
/
" from the wall. This
2
*
9 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vi33nrVi33pr

Table of Contents