Biostar TA790GX M2 PLUS - BIOS Manual page 45

TA790GX XE/TA790GX M2+/TA790GXB M2+
Change Supervisor Passw ord
Setting the supervisor password will prohibit everyone except the supervisor from
making changes using the CMOS Setup Utility. You will be prompted with to enter a
password.
User Acess Level
T his item allows supervisor to set the user level.
Options: Full Access (Default) / No Access / View Only / Limited
Change User Password
If the Supervisor Password is not set, then the User Password will function in the
same way as the Supervisor Password. If the Supervisor Password is set and the User
Password is set, the "User" will only be able to view configurations but will not be
able to change them.
Clear User Passw ord
T his item is for clearing user passwo rd.
Passw ord Check
T his item is for setting the timing that checking password.
Options: Setup (Default) / Always
Boot Sector Virus Protection
T his option allows you to choose the VIRUS Warning feature that is used to protect
the IDE H ard Disk boot sector. If this fun ction is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and
sound an alarm beep.
Options: Disabled (Default) / Enabled
BIOS Manual
44