Desa CDCFNR Owner's Operation And Installation Manual page 26

OPERATING FIREPLACE
Continued
Note: The burner may light if hand-held
remote was on when selector switch was last
turned off. You can now turn the burner on and
off with the hand-held remote control unit.
IMPORTANT: Do not leave the selector switch
in the REMOTE or ON position when the pilot
is not lit. This will drain the battery.
Flame
Adjustment Knob
REMOTE
OFF
ON
Selector Switch in Remote
Position (Optional Remote Control)
Figure 47 - Setting the Selector Switch,
Control Knob and Flame Adjustment
Knob for Remote Operation
ON/OFF SERIES (MODEL [C]GHRCB)
Hold the control button on the hand-held remote
until burner turns on. Hold the control button
again until burner turns off (see Figure 48).
press both buttons on hand-held
TO LOCK
remote control until light stops flashing. Hand-
held remote control is now locked. If the fire is
on it will be turned off automatically. In the
locked state, the light will not light up when
any button is pressed.
press both buttons together
TO UNLOCK
on hand-held remote control until the light
stops flashing. The hand-held remote is now
unlocked.
26
Control
Knob
OUT IN
LO
www.desatech.com 111244-01D