Super Io Configuration - Biostar MCP6P3 - BIOS Manual

MCP6P3/N68S3 BIOS Manual
SuperIO Configuration
Advanced
Confi gure ITE8718 Super IO Chi pset
Onboa rd Floppy Con troller
Seria l Port1 Addre ss
Paral lel Port Addr ess
Par allel Port Mo de
Par allel Port IR Q
Keybo ard PowerOn
Mouse PowerOn
Resto re on AC Powe r Loss
vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.
Onboard Floppy Controller
Select enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you installed another FDC or the system uses
no floppy drive, select disabled in this field.
Options: Enabled (Default) / Disabled
Serial Port1 Address
Select an address and corresponding interrupt fo r the first and second seri al ports.
Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Parallel Port Address
T his item allows you to determine access onboard p arallel port controller with which
I/O Address.
Options: 378 (Default) / 278 / 3BC / Disabled
Parallel Port Mode
T his item allows you to determine how the parallel port should function.
Options: Normal (Default)
EPP
ECP
ECP+EPP
BIOS S ETUP UTILITY
[ Enabled]
[ 3F8/IRQ4]
[ 378]
[ Normal]
[ IRQ7]
[ Disabled]
[ Disabled]
[ Power Off]
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
9
Allo ws BIOS to E nable
or D isable Flopp y
Cont roller
S elect Screen
S elect Item
C hange Option
+-
F1 G eneral Help
F1 0 S ave and Exit
ES C E xit