Biostar K8M800-M7A Manual page 63

K8M800-M7A BIOS Setup
USB Resume f rom S3
This item allows you to enable or disabled USB resume from S3.
The Choices: Disabled (default), Enabled.
VG A
When set to On, any event occurring at a VGA P ort will awaken a system which
has been powered down.
The Choices: Off (default), On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LP T
(printer) port will awaken a system which has been powered down.
The Choices: LPT/COM (default), COM, LP T, NONE.
HDD & FDD
When this option is set to On, any event occurring on a hard drive or a floppy
drive will awaken a system which has been powered down.
The Choices: On (default), Off.
PCI Master
When set to On, you need a LAN add-on card which supports the power
function. It should also support the wake-up on LAN jump.
The Choices: Off (default), On.
PowerOn by PCI Card
When you select Enabled, a P ME signal from P CI card returns the system to Full
ON state.
The Choices: Disabled (default), Enabled.
Modem Ring Resume
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
When " Enabled", you can set the date and time at which the RTC (real-time
clock) alarm awakens the system fro m Suspend mode.
The Choices: Enabled, Disabled (default).
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when " RTC Resume" is set to " Enabled".
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up. This field
is only configurable when " RTC Resume" is set to " Enabled".
32