Biostar K8M800-M7A Manual page 35

K8M800-M7A BIOS Setup
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and P rogrammed
Input/ Output features.
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain " Plug and P lay" and P CI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency/ Voltage Control
This submenu allows you to change CP U Vcore Voltage and CP U/P CI clock. (However,
this f unction is strongly recommended not to use. Not properly change the voltage
and clock may cause the CPU or M/B damage! )
Load Optimized Defaults
This selection allows you to reload the BIOS when the system is having problems
particularly with the boot sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before defaults are set.
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from making
changes using the CMOS Setup Utility. You will be prompted with to enter a password.
4