Super Io Configuration - Biostar A760GE - BIOS Manual

A780GE/A760GE/A780LE/A785GE BIOS Manual
SuperIO Configuration
Advan ced
Configure ITE8 718 Super IO Chipse t
Onboard Floppy Controller
Serial Port1 A ddress
Parallel Port Address
Parallel Por t Mode
Parallel Por t IRQ
Keyboard Power On
Mouse PowerOn
Restore on AC Power Loss
vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc.
Onboard Floppy Controller
Select enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you installed another FDC or the system uses
no floppy drive, select disabled in this field.
Options: Enabled (Default) / Disabled
Parallel Port Address
T his item allows you to determine access onboard p arallel port controller with which
I/O Address.
Options: 378 (Default) / 278 / 3BC / Disabled
Serial Port1 Address
Select an address and corresponding interrupt fo r the first and second seri al ports.
Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Disabled
Parallel Port Mode
T his item allows you to determine how the parallel port should function.
Options: Normal (Default)
EPP
ECP
ECP+EPP
BIOS SETU P U TILITY
[Ena bled]
[3F8 /IRQ4]
[378 ]
[Nor mal]
[IRQ 7]
[Dis abled]
[Dis abled]
[Pow er Off]
Using Parallel port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
8
Allows BIOS to Enable
or Disable Floppy
Controller
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit