Pitch Adjustments; Pitch Slider - American Audio PSX - REV 1-2 User Manual And Reference Manual

PITCH ADJUSTMENTS

PITCH ADJUSTMENTS:
The different pitch adjustments allow a track's or a loop's playback speed to be manipulated. This speed
manipulations is commonly used to beat match between two or more music sources such as a turntable or
another CD played. The playback speed may be increased or decreased by a factor of +/-100. The next
section details the different pitch manipulation schemes.
1 2 3 4 5 6 7 8 9 0 AUTO
CUE
CUE ELAPSED TOTAL REMAIN
.
SINGLE
LOOP
RELOOP T PITCH
M S F
SCRATCH FLANGER HOLD ECHO TRANS
PARAMETER
TIME
8%/12%/16%
Figure 38
Activating the Pitch Slider (17):
must turn on the pitch adjustment function. Press the ON/OFF BUTTON (24)
located in the pitch control section of the unit. The ON/OFF BUTTON (24) LED
will glow when the function is activated. If the pitch function is not activated
the PITCH SLIDER (17) will not function.
1 2 3 4 5 6 7 8 9 0 AUTO
CUE
CUE ELAPSED TOTAL REMAIN
.
SINGLE
LOOP
RELOOP
T M S F PITCH
SCRATCH FLANGER HOLD ECHO TRANS PARAMETER
TIME
8%/12%/16%

1. PITCH SLIDER:

This function will increase or decrease the tracks playback speed or "PITCH."
EJECT/
STOP
The maximum pitch percentage manipulation in this function is +/-16%. The
SGL/CTN
AUTO CUE
PITCH SLIDER (17) is used to decrease or increase the playback pitch. If the
ON/OFF
slider is move up (towards the top of the unit) the pitch will decrease, if the
slider is moved down (towards the bottom of the unit) the pitch will increase. The
SAMPLE PITCH
PITCH SLIDER (17) adjustment can be changed to range from +/-8%, +/-12%,
or +/-16% (See changing "PITCH SLIDER PERCENTAGE RANGE" on the
next page). This pitch adjustments will effect normal playback and loops only
when the Pitch On/Off Button (24) is turned on. The pitch adjustments will
not effect your samples.
To activate the PITCH SLIDER (17) you
EJECT/
STOP
SGL/CTN
AUTO CUE
ON/OFF
Using the Pitch Slider (17):
as described above. To use the pitch slider (17) slide the slider up and down.
SAMPLE PITCH
Down will increase the pitch and up will decrease the pitch. When the slider
is in the center position, a green LED just left of the slider will glow. When
this slider is glowing there is zero pitch being applied to the track, regardless
if the pitch function is on or off.
Figure 40
American Audio - www.americandj.com - PSX™ Instruction Manual Page 22
© ®
Figure 39
Be sure the pitch function has been engaged
1 2 3 4 5 6 7 8 9 0 AUTO
CUE
CUE
ELAPSED TOTAL REMAIN .
SINGLE
LOOP
RELOOP
T M S F PITCH
EJECT/
STOP
SCRATCH FLANGER HOLD ECHO TRANS
PARAMETER SGL/CTN
TIME AUTO CUE
8%/12%/16% ON/OFF
SAMPLE PITCH