Additional Settings - ACRONIS TRUE IMAGE ECHO - ENTERPRISE SERVER User Manual

7.4.7 Additional settings

1. Set current date and time for the restored files
The preset is enabled.
Choose whether to restore files' date and time from the archive or assign the files the
current date and time.
2. Validate backup archive before restoration
The preset is disabled.
Before data is restored from the archive, Acronis True Image Echo Enterprise Server can
check its integrity. If you suspect that the archive might have been corrupted, select this
option.
To check archive data integrity you must have all incremental and differential backups
belonging to the archive and the initial full backup. If any of successive backups is
missing, validation is not possible.
3. Having restored a disk/partition from an image, Acronis True Image Echo Enterprise
Server can check the integrity of the file system. To do so, select Check file system
after restoration.
Verification of the file system is available only when restoring disk/partitions under
Windows and for FAT16/32 and NTFS file systems.
4. Restore file and folders without restoring full path
The preset is disabled.
When enabled, files and folders are restored directly to the folder that you specified as a
target folder. When disabled, the full path to the files and folders that exists in the backup
will be reproduced within the target folder.
5. Change SID after restoration is finished
The preset is disabled.
Acronis True Image Echo Enterprise Server can generate a unique security identifier (SID)
for the restored system. You do not need a new SID when restoring a system on the
same computer where the image was taken from or when creating a full duplicate that
will replace the original system. Generate a new SID if the original and the restored
systems will work concurrently in the same workgroup or domain.
6. Run Acronis Recovery for MS Exchange Bare Metal Restore after data
Recovery
The preset is disabled
If you are going to restore Microsoft Exchange Server on bare metal, select this
parameter in order to start the Acronis Recovery for MS Exchange bare metal restore task
automatically after the image restoration is finished.
7. Restart the machine automatically
The preset is disabled.
Sometimes one or more reboots may be required during the restoration process. With this
option enabled, the program will not ask you for permission to reboot now or later, but
immediately reboots the machine.
98 Copyright © Acronis, Inc., 2000-2009