ACRONIS TRUE IMAGE ECHO - ENTERPRISE SERVER User Manual page 154

/partition:[partition
number]
/letter
Unplug
/letter:X
/letter:all
asz_create
/password:[password]
/harddisk:X
/partition:[partition
number]
/size:[ASZ size in sectors
| unallocated]
/asz_activate
asz_activate
/password:[password]
asz_delete
/partition:[partition
number]
Clone
/harddisk:[disk number]
/target_harddisk:[disk
number]
154
Specifies a list of partitions to be mounted as virtual drives. Without
this option, all partitions stored in the image will be mounted.
To obtain the partition number for this option, list the image
contents with the
/list/filename
from the Idx column.
Assigns letters to the mounted drives. This option is used with
option only.
/partition
Specifies the virtual drive to be disconnected by letter.
Disconnects all virtual drives.
Sets a password for the Acronis Secure Zone.
Specifies the hard disk number where the Acronis Secure Zone will
be created.
Specifies partitions from which free space will be taken for Acronis
Secure Zone.
Sets the Acronis Secure Zone size (in sectors).
If not specified, the size is set as an average between the maximal
(unallocated space plus free space on all partitions selected with the
option) and minimal (about 35MB) values.
/partition
Either way, the program will first use the unallocated space. If there
is not enough unallocated space, the selected partitions will be
decreased. Resizing of locked partitions requires a reboot.
With "unallocated", the zone will use all unallocated space on the
disk. Partitions will be moved, if necessary, but not resized. Moving
of locked partitions requires a reboot. The
ignored.
Activates the Acronis Startup Recovery Manager. The option will not
take effect if the system partition is resized during Acronis Secure
Zone creation. In that case, use the separate
command.
Specifies a password for the Acronis Secure Zone.
Specifies partitions to which free space will be added after the
Acronis Secure Zone is deleted. If you specify several partitions, the
space will be distributed proportionally to each partition's size.
Specifies a source hard disk which will be cloned to the new hard
disk.
Specifies the target hard disk number where the source hard disk
will be cloned.
command an use the number
/partition
Copyright © Acronis, Inc., 2000-2009
option is
/asz_activate