Restoration Summary And Executing Restoration; Setting Restore Options - ACRONIS TRUE IMAGE ECHO - ENTERPRISE SERVER User Manual

Table of Contents

7.3.14 Restoration summary and executing restoration

1. At the final step, the restoration summary is displayed.

Up to this point, you can click Back to make changes in the created task. If you click

Cancel, no changes will be made to disk(s). Clicking Proceed will launch the task

execution.

2. (For Acronis True Image Echo Enterprise Server local or standalone version) The task

progress will be shown in a special window.

You can stop the procedure by clicking Cancel. However, it is critical to note that the

target partition will be deleted and its space unallocated – the same result you will get if

the restoration is unsuccessful. To recover the "lost" partition, you will have to restore it

from the image again.

If you are going to restore Microsoft Exchange Server on bare metal, select the Run

Acronis Recovery for MS Exchange Bare Metal Restore after data Recovery

parameter in order to start the Acronis Recovery for MS Exchange bare metal restore task

automatically after the image restoration is finished.

If Acronis Universal Restore finds no Hardware Abstraction Layer (HAL) or mass storage

devices drivers compatible with the new hardware in all available sources, you will be

prompted to browse to a network share drive or insert a floppy disk or CD with the

necessary drivers. Upon starting Windows, it will initialize the standard procedure for

installing new hardware. At this point, you will be able to specify drivers for devices if

Windows cannot find them automatically.

To view or edit the default restore options in Acronis True Image Echo Enterprise Server

local version, select Tools -> Options -> Default Restoration Options from the main

program menu.

To do the same remotely, connect the Acronis True Image Management Console to the

remote computer, click Remote Computer Options and select Default Restoration

options.

Table of Contents