ACRONIS TRUE IMAGE 9.1 - WORKSTATION User Manual page 106

Specifies partitions from which free space will be taken for Acronis Secure Zone creation.
/size:[ASZ size in sectors]
Sets the Acronis Secure Zone size (in sectors). If this size is not specified, it will be set as
average between maximal and minimal values, including unallocated spaces on the all listed
partitions.
/asz_activate
Activates the Acronis Secure Zone after creation (or, rather, activates Acronis Startup
Recovery Manager).
/asz_activate option will not take effect, if the system partition is resized during Acronis
Secure Zone creation. Use /asz_activate command to activate Acronis Secure Zone after it is
created.
/reboot
Reboots the workstation after the Acronis Secure Zone is created.
/log:[file name]
Creates a log file of the current operation with the specified file name.
8. asz_delete
Deletes the Acronis Secure Zone from your hard disk.
Options
/partition:[partitions list]
Specifies partitions to which free space will be added after the Acronis Secure Zone is
deleted. If you specify several partitions, the space will be distributed proportionally to each
partition's size.
/log:[file name]
Creates a log file of the current operation with the specified file name.
9. asz_activate
Activates the Acronis Secure Zone (or, rather, activates Acronis Startup Recovery Manager).
This command may also be used as an option with 'asz_create' command.
10. verify
Verifies the image archive data integrity.
Options
/filename:[filename]
Specifies the name of the image file to verify.
/password:[image password]
Specifies the password for image file (if required).
/net_user:[username]
106 Copyright © Acronis, Inc., 2000-2006