ACRONIS TRUE IMAGE 9.1 - WORKSTATION User Manual page 105

/target_harddisk:[disk number]
Specifies the target hard disk number where the source hard disk will be cloned.
5. explore
Connects an image file as a virtual drive.
Options
/filename:[image file name]
The image file name.
/password:[image password]
The password for the image file (if required).
/partition:[partitions list]
Specifies a list of partitions to be mounted as virtual drives. Without this option, all partitions
stored in the image file will be mounted.
/letter
Assigns letters to the mounted drives. This option is used with /partition option only.
/net_user:[username]
Specifies a user name when exploring an image from a network drive.
/net_password:[password]
Specifies a user password when exploring an image from a network drive.
/log:[file name]
Creates a log file of the current operation with the specified file name.
6. unplug
Unmounts the image file connected as a virtual drive.
Options
/letter:X
Specifies the virtual disk to be disconnected by letter.
/letter:all
Disconnects all virtual drives.
7. asz_create
Creates Acronis Secure Zone on the selected drive.
Options
/harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will be created.
/partition:[partitions list]
Copyright © Acronis, Inc., 2000-2006 105