ACRONIS TRUE IMAGE 9.1 - WORKSTATION User Manual page 103

Specifies the partitions to include into the image file by numbers. The list of available
partitions is provided by /list. Partition numbers are specified as <disk number>-<partition
number>, e.g.:
/partition: 1-1,1-2,3-1
/file_partition:[partition letter]
Specifies the partition where the image file will be stored (by letter or number). This option
is used with /filename:file_name. In that case the file name must be specified without drive
letter or root folder. For example:
/file_partition:D /filename:"\1.tib"
/raw
Use this option to create an image of a disk (partition) with unrecognized or unsupported file
system. This will copy all disk/partition contents sector-by-sector. Without this option only
the sectors containing useful system and user data are imaged.
/compression:[0...9]
Specifies the image compression level. It ranges from 0 to 9 and is set to 3 by default.
/incremental
Sets the image type to incremental. If there is no a basic image file to append an
incremental one, a complete image will be created.
/split:[size in MB]
Splits image file into parts of the specified size.
/reboot
Reboots the workstation after the operation is completed.
/log:[file name]
Creates a log file of the current operation with the specified file name.
2. deploy
Restores a disk or partition from an image.
Options
/filename:[filename]
Specifies the name of the image file to restore.
/net_user:[username]
Specifies a user name when restoring an image from a network drive.
/net_password:[password]
Specifies a user password when restoring an image from a network drive.
/file_partition:[partition letter]
Specifies the partition where the image file is stored (by letter or number). This option is
used with /filename:file_name. In this case the file name must be specified without drive
letter or root folder. For example:
/file_partition:D /filename:"\1.tib"
Copyright © Acronis, Inc., 2000-2006 103