Task Start Conditions - ACRONIS Backup & Recovery 10 Advanced Server SBS Edition User Manual

You might have to provide the access credentials for the secondary destination. Enter the credentials
on prompt.
3.4.1.18

Task start conditions

This option is effective in Windows and Linux operating systems.
This option is not available when operating under bootable media.
This option determines the program behavior in case a backup task is about to start (the scheduled
time comes or the event specified in the schedule occurs), but the condition (or any of multiple
conditions) is not met. For more information on conditions please see Scheduling (p. 152) and
Conditions (p. 162).
The preset is: Wait until the conditions are met.
Wait until the conditions are met
With this setting, the scheduler starts monitoring the conditions and launches the task as soon as the
conditions are met. If the conditions are never met, the task will never start.
To handle the situation when the conditions are not met for too long and further delaying the backup
is becoming risky, you can set the time interval after which the task will run irrespective of the
condition. Select the Run the task anyway after check box and specify the time interval. The task will
start as soon as the conditions are met OR the maximum time delay lapses, depending on which
comes first.
Time diagram: Wait until conditions are met
102 Copyright © Acronis, Inc., 2000-2010