Selecting Task Periodicity - ACRONIS TRUE IMAGE CORPORATE WORKSTATION 8.0 User Manual

Scheduling
Having selected partitions and/or disks, click Next. Note that this button is disabled
until at least one partition or disk is selected.
Other parameters are set further in the same way as described in the Chapter 4
related to image creation.

10.1.2 Selecting task periodicity

After you set image parameters, you must set task execution periodicity.
Do not start automatically - a task will not be executed. You can select this
variant to leave it disabled.
Daily – a task will be executed daily at the specified time (selected on the next
step).
Weekly - a task will be executed weekly or in some weeks at the specified time and
day (selected on the next step).
Monthly - a task will be executed monthly at the specified time and day (selected
on the next step).
One time only - a task will be executed once at the specified time and day
(selected on the next step).
When my computer starts - a task will be executed at OS startup.
When I log on - a task will be executed, when you log in the OS.
When my computer shuts down - a task will be executed before every
shutdown or reboot.
When I log off - a task will be executed, when you log off the OS.