ACRONIS Backup & Recovery 10 Advanced Server User Manual page 333

If the value is 0, no reconnection attempts will be performed; the agent will only check for
the license as determined by License Check Interval.
License Server Address
Description: Specifies the network name or IP address of Acronis License Server.
Possible values: Any string 0 to 32765 characters long
Default value: Empty string
Log Cleanup Rules
Specifies how to clean up the agent log.
This parameter has the following settings:
Max Size
Description: Specifies the maximum size of the agent log folder, in kilobytes.
Possible values: Any integer number between 0 and 2147483647
Default value: 1048576 (that is, 1 GB)
Percentage To Keep
Description: Specifies the percentage of the maximum log size to keep on cleanup.
Possible values: Any integer number between 0 and 100
Default value: 95
For details on how the agent log is cleaned up, see Log cleanup rules (p. 94).
Windows Event Log
Specifies when to record Acronis Backup & Recovery 10 Agent's events into the Application event
log in Windows.
This parameter has two settings:
Trace State
Description: Specifies whether to record the agent's events into the event log.
Possible values: True or False
Default value: False
Trace Level
Description: Specifies the minimum level of severity of events to be recorded into the event
log. Only events of levels greater than or equal to the value in Trace Level will be recorded.
Possible values: 0 (Internal event), 1 (Debugging information), 2 (Information), 3 (Warning), 4
(Error), or 5 (Critical error)
Default value: 4 (only errors and critical errors will be recorded—if Trace State is set to True)
SNMP
Specifies the types of the agent's events to send notifications about by means of Simple Network
Management Protocol (SNMP).
This parameter has the following settings:
Trace State
Description: Specifies whether to send the SNMP notifications.
Possible values: True or False
Default value: False
Trace Level
Copyright © Acronis, Inc., 2000-2010 333