ACRONIS Backup & Recovery 10 Advanced Server User Manual page 255

4. [optional] Specify Windows drivers to be added to Windows PE. Once you boot a machine into
Windows PE, the drivers can help you access the device where the backup archive is located.
Click Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA
controller, network adapter, tape drive or other device. You will have to repeat this procedure
for each driver you want to be included in the resulting WinPE boot media.
5. Choose whether you want to create ISO or WIM image or upload the media on Acronis PXE
Server.
6. Specify the full path to the resulting image file including the file name, or specify the PXE server
and provide the user name and password to access it.
7. Check your settings in the summary screen and click Proceed.
8. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into WinPE, Acronis Backup & Recovery 10 starts automatically.
To create a PE image (ISO file) from the resulting WIM file:

replace the default boot.wim file in your Windows PE folder with the newly created WIM file. For
the above example, type:
copy c:\AcronisMedia.wim c:\winpe_x86\ISO\sources\boot.wim

use the Oscdimg tool. For the above example, type:
oscdimg -n –bc:\winpe_x86\etfsboot.com c:\winpe_x86\ISO
c:\winpe_x86\winpe_x86.iso
For more information on customizing Windows PE, see the Windows Preinstallation Environment
User's Guide (Winpe.chm).
6.10.1.4 Building Bart PE with Acronis Plug-in from Windows distribution
1. Get the Bart PE builder.
2. Install Bootable Media Builder from the Acronis Backup & Recovery 10 setup file.
3. Change the current folder to the folder where the Acronis Plug-in for WinPE is installed—by
default: C:\Program Files\Acronis\Bootable Components\WinPE.
If the plug-in is installed in a folder other than the default folder, change the path accordingly
(check the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\Bootable
Components\Settings\WinPE for the plug-in location).
4. Run the following command:
export_license.bat
5. Copy the contents of the current folder—by default: C:\Program Files\Acronis\Bootable
Components\WinPE—to the %BartPE folder%\plugins\Acronis.
6. Insert your Windows distribution CD if you do not have a copy of Windows installation files on
the HDD.
7. Start the Bart PE builder.
8. Specify the path to the Windows installation files or Windows distribution CD.
9. Click Plugins and check whether the Acronis Backup & Recovery 10 plug-in is enabled. Enable if
disabled.
10. Specify the output folder and the full path to the resulting ISO file including the file name or the
media to create.
11. Build the Bart PE.
12. Burn the ISO to CD or DVD (if this has not been done yet) or copy to a flash drive.
Copyright © Acronis, Inc., 2000-2010 255