Data Type; Content Selection; Disks/Volumes Selection - ACRONIS Backup & Recovery 10 Advanced Server User Manual


If the archive is stored on a network share, expand the Network folders group, then select
the required networked machine and then click the shared folder. If the network share
requires access credentials, the program will ask for them.
Note for Linux users: To specify a Common Internet File System (CIFS) network share which is mounted on a
mount point such as /mnt/share, select this mount point instead of the network share itself.
 If the archive is stored on an FTP or SFTP server, type the server name or address in the Path
field as follows:
ftp://ftp_server:port _number or sftp://sftp_server:port number
If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.
After entering access credentials, the folders on the server become available. Click the
appropriate folder on the server.
You can access the server as an anonymous user if the server enables such access. To do so,
click Use anonymous access instead of entering credentials.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
 If the archive is stored on a locally attached tape device, expand the Tape drives group, then
click the required device.
2. In the table to the right of the tree, select the archive. The table displays the names of the
archives contained in each vault/folder you select.
While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the Refresh button
to refresh the list of archives.
3. Click OK.
6.3.3

Data type

Choose what type of data to recover from the selected disk backup:
 Disks - to recover disks
 Volumes - to recover volumes
 Files - to recover specific files and folders
6.3.4

Content selection

The representation of this window depends on the type of data stored in the archive.
6.3.4.1

Disks/volumes selection

To select a backup and disks/volumes to recover:
1. Select one of the successive backups by its creation date and time. Thus, you can revert the disk
data to a certain moment in time.
Specify the items to recover. By default, all items of the selected backup will be selected. If you
do not want to recover certain items, just uncheck them.
To obtain information on a disk/volume, right-click it and then click Information.
2. Click OK.
214 Copyright © Acronis, Inc., 2000-2010