ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER - COMMAND LINE Cli Reference Manual page 38

or:
--filename:smb://hostname/sharename/filename –-net_user:username \ -–
net_password:password
--log:smb://hostname/sharename/logfilename –-log_net_user:username \ -–
log_net_password:password
Only the last two options can be used if the user name or password contains the @ or / symbols.
To access an NFS network drive, specify the backup file name as follows:
nfs://hostname/share name:/remote filename
For example:
trueimagecmd --list --filename:nfs://dhcp6-
223.acronis.com/sdb3/nfs_root:/mike/md1.tib
shows contents of /mike/md1.tib archive. /mike/md1.tib is located on dhcp6-223.acronis.com
node in /sdb3/nfs_root directory exported by NFS.
If the vault option is specified the filename option is ignored.
password:[password]
a) Password for the archive, if the archive location is other than ASZ.
b) Password for the ASZ, if archive location is ASZ.
asz:[number of archive]
Addresses to the ASZ and selects the archive (a full backup with or without increments).
To get the archive number, use asz_content.
index:N
N = Number of the backup in an archive:
 1 = basic full backup
 2 = 1st increment... and so on
 0 (default) = latest increment
Selects a backup in a sequence of incremental backups inside the archive.
To get a backup index from the ASZ, use asz_content.
ftp_user:[username]
Specify a user name for access to an FTP server.
ftp_password:[password]
Specify a password for access to an FTP server.
net_user:[username]
Specifies the user name for logon to the network share to save the resulting archive.
38 Copyright © Acronis, Inc., 2000-2010