ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER - COMMAND LINE Cli Reference Manual page 18

1.1.3.8 convert
target_filename:[file name]
Specifies the path to and name of the virtual disk file to be created. The file extension corresponds to
the type of virtual machine to which the virtual disk will be added:

VMware virtual machine - .vmdk

MS virtual machine and Citrix XenServer - .vhd

Parallels virtual machine - .hdd.
harddisk:[disk number]
Specifies the hard disks to convert by numbers. For each disk, a separate virtual disk will be created.
By specifying
/harddisk:DYN
you will convert all dynamic volumes that are present in the system.
vm_type:[vmware|esx|Microsoft|parallels]
The type of virtual machine to which the virtual disk will be added.
ur
Use when converting the image of a disk, containing Windows, and the resulting virtual disk is
supposed to be bootable. With this key, the program will add drivers, necessary for the virtual
machine type selected with the vm_type key, to the resulting virtual disk. If the image was taken
from a virtual machine of the same type, normally the key is not needed.
Drivers for the virtual machine reside in the storage, defined by the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\UniversalRestore\DriversPackPath. In case the storage
has been moved, please change the key or use the command ur_path:[path].
ur_path:[path]
The same as ur with custom path to the virtual machine drivers storage.
1.1.3.9 list
filename:[file name]
With this option, the image contents are displayed.
When listing image contents, the partition numbers may not coincide with those in the
drives/partitions list, if the image does not contain all the disk partitions. For example, if the image
contains partitions 2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the deploy /partition command cannot find a partition in the image by its physical number, use the
partition:<number in the image> /target_partition:<physical number of the target partition> keys.
For the above example, to restore partition 2-5 to its original place use:
/partition:2-2 /target_partition:2-5
18 Copyright © Acronis, Inc., 2000-2010