ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER - COMMAND LINE Cli Reference Manual page 19

If the vault option is specified the filename option is ignored.
vault:[path]
Specifies a path to the location whose archives you want to list. Along with archive names, it lists
Universally Unique Identifiers (UUID) that are used with the arc_id option.
The following locations are supported:

Local folders, e.g.: /vault:C:\Test , or /vault:"C:\Test 1"

Network folders, e.g.: /vault:\\ServerA\Share\

Managed vaults (for advanced product editions only), e.g.:
/vault:bsp://StorageNode/VaultName

FTP and SFTP, e.g.: /vault:ftp://ServerA/Folder1
 CD, DVD – with the path specified as a local path, e.g.: /vault:F:\

Acronis Secure Zone, e.g.: /vault:atis:///asz
 Tapes, e.g.: /vault:atis:///tape?0
 Unmanaged vaults are specified by their path. For example, if a vault is located in a folder,
specify the path to that folder.
If the vault option is specified the filename option is ignored.
arc:[archive name]
Used in combination with the vault option. Lists all backups contained in the archive.
If not specified, the arc_id option is used. If both the arc and arc_id options are specified, the arc_id
option is used.
arc_id:[archive id]
Used in combination with the vault option. Lists all backups of the selected archive.
If not specified, the arc option is used. If both the arc and arc_id options are specified, the arc_id
option is used.
1.1.3.10 explore
partition:[partition number]
Specifies a list of partitions to be mounted as virtual drives. Without this option, all partitions stored
in the image will be mounted.
To obtain the partition number for this option, list the image contents with the /list/filename
command and use the number from the Idx column.
letter:X
Assigns letters to the mounted drives. This option is used with the partition option only.
Copyright © Acronis, Inc., 2000-2010 19