ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER - COMMAND LINE Cli Reference Manual page 20

1.1.3.11 unplug
letter:X
Specifies the virtual drive to be disconnected by letter.
letter:all
Disconnects all virtual drives.
1.1.3.12 asz_create
harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will be created.
partition:[partition number]
Specifies partitions from which free space will be taken for Acronis Secure Zone.
size:[ASZ size in sectors | unallocated]
Sets the Acronis Secure Zone size (in sectors).
If not specified, the size is set as an average between the maximal (unallocated space plus free space
on all partitions selected with the partition option) and minimal (about 35MB) values.
Either way, the program will first use the unallocated space. If there is not enough unallocated space,
the selected partitions will be decreased. Resizing of locked partitions requires a reboot.
With "unallocated", the zone will use all unallocated space on the disk. Partitions will be moved, if
necessary, but not resized. Moving of locked partitions requires a reboot. The partition option is
ignored.
1.1.3.13 asz_delete
partition:[partition number]
Specifies partitions to which free space will be added after the Acronis Secure Zone is deleted. If you
specify several partitions, the space will be distributed proportionally based on each partition's size.
1.1.3.14 clone
harddisk:[disk number]
Specifies a source hard disk which will be cloned to the new hard disk.
target_harddisk:[disk number]
Specifies the target hard disk number where the source hard disk will be cloned.
20 Copyright © Acronis, Inc., 2000-2010