ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER - UPDATE 3 User Manual page 352

The component will use the default settings, which is to use encryption if possible and to
trust self-signed SSL certificates (see the following option).
Enabled
Encryption is enabled. In Encryption, select one of the following:
Enabled
Data transfer will be encrypted if encryption is enabled on the server application, otherwise
it will be unencrypted.
Disabled
Encryption is disabled; any connection to a server application which requires encryption will
not be established.
Required
Data transfer will be performed only if encryption is enabled on the server application (see
"Server Encryption options"); it will be encrypted.
Authentication parameters
Selecting the Trust self-signed certificates check box allows the client to connect to the
server applications that use self-signed SSL certificates such as certificates created during the
installation of Acronis Backup & Recovery 10 components—see SSL certificates (p. 86).
You should keep this check box selected, unless you have a Public Key Infrastructure (PKI) in
your environment.
In Use Agent Certificate Authentication, select one of the following:
Do not use
The use of SSL certificates is disabled. Any connection to a server application which requires
the use of SSL certificates will not be established.
Use if possible
The use of SSL certificates is enabled. The client will use SSL certificates if their use is enabled
on the server application, and will not use them otherwise.
Always use
The use of SSL certificates is enabled. The connection will be established only if the use of SSL
certificates is enabled on the server application.
Disabled
The same as Not configured.
Server Encryption options
Specifies whether to encrypt the transferred data when the component acts as a server
application.
Select one of the following:
Not Configured
The component will use the default setting, which is to use encryption if possible (see the
following option).
Enabled
Encryption is enabled. In Encryption, select one of the following:
Enabled
Data transfer will be encrypted if encryption is enabled on the client application, otherwise it
will be unencrypted.
352 Copyright © Acronis, Inc., 2000-2010