ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER - UPDATE 3 User Manual page 127

This option defines whether the agent(s) operating on the managed machine have to log events of
the recovery operations in the Application Event Log of Windows (to see this log, run eventvwr.exe
or select Control Panel > Administrative tools > Event Viewer). You can filter the events to be
logged.
The preset is: Use the setting set in the Machine options.
To select whether to log the recovery operations events in the Application Event Log of
Windows:
Select one of the following:

Use the setting set in the Machine options – to use the setting specified for the machine. For
more information refer to Machine options (p. 95).
 Log the following event types – to log events of the recovery operations in the Application Event
Log. Specify the types of events to be logged:
 All events – log all events (information, warnings and errors)
 Errors and warnings

Errors only

Do not log - to disable logging events of the recovery operations in the Application Event Log.
SNMP notifications
This option is effective for both Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The option defines whether the agent(s) operating on the managed machine have to send the log
events of the recovery operations to the specified Simple Network Management Protocol (SNMP)
managers. You can choose the types of events to be sent.
For detailed information about using SNMP with Acronis Backup & Recovery 10, please see "Support
for SNMP (p. 50)".
The preset is: Use the setting set in the Machine options.
To select whether to send the recovery operations events to the SNMP managers:
Choose one of the following:
 Use the setting set in the Machine options – to use the setting specified for the machine. For
more information refer to Machine options (p. 95).

Send SNMP notifications individually for recovery operation events – to send the events of the
recovery operations to the specified SNMP managers.

Types of events to send – choose the types of events to be sent: All events, Errors and
warnings, or Errors only.
 Server name/IP – type the name or IP address of the host running the SNMP management
application, the messages will be sent to.

Community – type the name of SNMP community to which both the host running SNMP
management application and the sending machine belong. The typical community is "public".
Click Send test message to check if the settings are correct.

Do not send SNMP notifications – to disable sending the log events of the recovery operations to
SNMP managers.
127 Copyright © Acronis, Inc., 2000-2010