Adding To An Existing Sonos System - Sonos ZONEPLAYER 120 Product Manual

Sonos ZonePlayer 120

Adding to an Existing Sonos System

Once you've got a Sonos Multi-Room Music System set up, you can easily add more
Sonos components any time (up to 32 zones).
If your house has structured (built-in) wiring, you can make a wired connection to the
additional ZonePlayers or ZoneBridges. If you don't, our built-in wireless technology
is ideal for you.
Add a Zone
Note: If you are replacing the ZonePlayer or ZoneBridge that is
currently attached to your router, first add the new Sonos
component to your music system (steps below.) You can then
unplug the wired Sonos component from your router, replace it
with the new one, and move the original ZonePlayer or ZoneBridge
to a new location.
Choose one of the following options:
1.
• If you are adding an amplified ZonePlayer 120, attach desired speakers.
(Power rating should be at least 75W for 8 Ohm speakers and at least
150W for 4 Ohm speakers.)
• If you are adding a ZonePlayer 90, connect it to an external amplified device.
• If you are adding a ZoneBridge, attach the power adapter.
If you are using speaker wire, use your finger to firmly
push the spring-loaded speaker posts inward to reveal the
connection hole.
f your speakers have banana connectors, you can insert
I
the plugs directly into the banana jacks on the back of the
ZonePlayer (available in North America only.)
5