Using Go To - Dell PowerVault MD3220 Owner's Manual

6 To search for all nodes based on their virtual disk capacity, perform these
steps:
Select Find all virtual disks with capacity.
a
Type the capacity in the GB box.
b
Specify that the capacity to be matched is less than, equal to, or
c
greater than the capacity entered in the GB box.
Go to step 8.
d
7 To search for all Free Capacity nodes with a particular capacity, perform
these steps:
NOTE:
selected or from the Mappings tab. You must cancel the selection of the
Search by name option to use this option.
Select Find all free capacity nodes.
a
Type the capacity in the GB box.
b
Specify that the free capacity to be matched is less than, equal to, or
c
greater than the capacity entered in the GB box.
Go to step 8.
d
8 Click Find Next.
To see every node that matches the criteria, click Find Next repeatedly. If
no matches are found, the Search Failed dialog appears. Click OK, and re-
enter the search criteria.
9 To close the dialog, click Cancel.
To continue searching for nodes with the same criteria after the Find
dialog has been closed, press F3.

Using Go To

Use the Go To option to quickly jump to an associated snapshot repository
virtual disk, snapshot virtual disk, source virtual disk, or target virtual disk.
These virtual disks appear in the Logical pane of the Logical tab.
The Go To option is available only if the Snapshot premium feature or the
Virtual Disk Copy premium feature is enabled or if snapshot virtual disks or
virtual disk copies currently exist on the storage array. The Go To option is not
accessible from the Mappings tab of the Array Management Window.
228
Troubleshooting: Your Storage Array Software
This option is not available when the Search by name option is