Downloading Only Nvsram Firmware - Dell PowerVault MD3220 Owner's Manual

12 To locate the directory in which the file to download resides, click Browse
in the Select files area.
The Select File dialog appears.
13 Select the file to download.
14 Click OK.
15 If you want to download the NVSRAM file with the RAID controller
module firmware, select Download NVSRAM file with firmware in the
Select files area.
Any attributes of the firmware file appear in the Firmware file information
area. The attributes indicate the version of the firmware file.
Any attributes of the NVSRAM file appear in the NVSRAM file
information area. The attributes indicate the version of the NVSRAM file.
16 If you want to download the file and activate the firmware and NVSRAM
later, select the Transfer files but don't activate them (activate later) check
box.
NOTE:
files and activating the firmware or NVSRAM later, the Transfer files but don't
activate them (activate later) check box is disabled.
17 Click OK.
The Confirm Download dialog appears.
18 Click Yes.
The download starts and a progress indicator appears in the Status column
of the Upgrade RAID Controller Module Firmware window.

Downloading Only NVSRAM Firmware

You also can use the command line interface (CLI) to download and activate
NVSRAM to several storage arrays. For more information, see the PowerVault
Modular Disk Storage Manager online help topics.
To download only NVSRAM firmware:
1 To download the NVSRAM firmware from:
• EMW—Go to step 7.
• AMW—Go to step 2.
180
Management: Firmware Downloads
If any of the selected storage arrays do not support downloading the