1.
Create a replication target on the target device.
On the target device, set up "Global LAN/WAN Target Settings" and then "Create a
"LAN/WAN Target" with:
Name
Start and end slots
Maximum simultaneous transfers
Password
Target replication start window
Target replication duration window (typically 24 hours)
Set up the global LAN/WAN settings by going to the Automigration/Replication tab and
seting global settings for compression over the replication link and the TCP/IP port number
used for replication data transfers.
Configure a LAN/WAN target, selecting names, slot mappings, and password for access.
102 Replication