Sonos MULTI-ROOM MUSIC SYSTEM User Manual page 188

Chapter 7: Sonos Controller for PC
Setting date and time
From the Zones menu, select Clocks and Alarms.
1.
Click the Date and Time button.
2.
Choose one of the following options:
3.
• Select your time zone, desired time format, and date format, and then click
OK.
• Select the Select the date and time from the Internet radio button, and then
click OK.
• Select the Set the date and time manually radio button. Make your selections
from the displayed fields, and then click OK.
Adding an alarm
From the Zones menu, select Clocks and Alarms.
1.
Click New.
2.
Choose the desired settings for this alarm, including the alarm time, the zone
3.
you would like the alarm to play in, the music source you'd like to play from, the
frequency of the alarm, and the volume and duration settings.
Note: If the music you've selected is not available (such as an Internet radio
station that has dropped off), your alarm will play the Sonos chime instead.To
stop the chime, you can press Pause.
• If you check Include linked zones, the alarm will play in the zones that are
linked together at the time the alarm goes off. It does not play in the zones that
were linked when the alarm was originally added to the Sonos system.
• If you check Shuffle music, the play mode for the selected alarm music will be
set to shuffle.
Editing an alarm
From the Zones pane, click to highlight the zone you want to change the alarm
1.
setting for.
From the Zones menu, select Clocks and Alarms.
2.
Select the alarm you wish to change, and click Edit.
3.
7-5