Camera Adjustment - Russound ComPoint ISK4 Instruction Manual

Camera Adjustment

Note: We recommend connecting the adapter cable to the camera before adjusting it.
The ISK4 camera is mounted in a yoke that allows both pan and tilt adjustments so you can
point the camera toward visitors at the door. To adjust the camera angle:
1. With a #1 or #2 Phillips screwdriver, loosen the yoke mounting screw so you can swivel
the camera to gain access to the tilt screws on both sides. Do not remove the screw.
2. Use a #0 Phillips screwdriver to slightly loosen both tilt screws. Do not remove the
screws.
3. Tilt the camera to the desired angle and tighten the tilt screws. Avoid overtightening.
4. Swivel the camera to the desired pan angle and tighten the yoke mounting screw.
12
BR BR/W G G/W O O/W BL BL/W