Intercom - Russound COMPOINT SYSTEM Instruction Manual

USER SECTION
Operation
Paging (cont'd)
If a zone label appears on the Advanced
Keypad, use the Next or Previous key to
select Page before you press the Talk key.
All keypads indicate which zone is sending
a page, so you'll know where it's coming
from. The zone indication remains for 30
seconds after the Talk key is released to
simplify replying to the page.
The keypads in the receiving zones also
sound a double ping when the Talk key is
released. This lets you know the person
sending the page is done speaking and
you can reply to the page. Within 30 sec-
onds, simply press and hold the Talk key
and speak. Your reply will be heard only in
the zone that sent the page.
If you wish to reply to the page after the
30-second limit, you can use the intercom
function described below or a return page
to send your reply.

Intercom

Unlike a system-wide page, an intercom
session occurs only between two zones.
To send an intercom, select a target zone
on a keypad. Press and hold the Talk key
and speak. Release the Talk key when
you're done speaking.
Basic Keypad. Press and release a zone
key to select the target zone. The key lights
up red to indicate the zone is selected.
10
Selecting a target zone on the Basic Keypad
If the selected target zone is in Do Not
Disturb mode, the zone key and DND key
blink rapidly for 7 seconds.
Advanced Keypad. Select a target zone by
using the Previous or Next key to scroll
through the list of available zones until the
display shows the zone you want for the
intercom session.
Selecting a target zone on the Advanced Keypad