Chapter 2. Installation; Hardware Installation; Software Installation; Overview - TP-Link TL-WN321G User Manual

54m wireless usb adapter

Hide thumbs Also See for TL-WN321G:

Table of Contents

Chapter 2. Installation

1. Connect one end of the USB cable to the Adapter.

2. Connect the other end of the USB cable to the USB port on your computer. Because the

Adapter gets its power from the host, there is no external power supply. The LED should light

up when the Adapter is plugged in and the PC is on.

Note:

The Adapter can also be plugged into the USB port on your computer

The Adapter's Setup Wizard will guide you through the installation of the Utility and drivers for

Windows 98SE, 2000, XP and Vista.

Before you install the software, please plug the adapter into your PC. After that, you will be

prompted "Found New Hardware Wizard", click the Cancel button, and run the Setup Wizard

program on the CD-ROM.

The Setup steps for Windows 98SE, 2000, XP and Vista are very similar, so the following

installation guide takes Windows XP for example.

1. Insert the Resource CD into your CD-ROM drive, Double-click Autorun.exe to start the

installation,The following screen for preparing setup will appear.

TL-WN321G

54M Wireless USB Adapter User Guide

- 3 -

directly.

Table of Contents

Show Quick Links

Table of Contents