Changing The Presser Foot - Bernina 350PE User Manual

Changing the Presser-Foot Sole

Changing the Presser Foot

raise the needle and the presser foot shaft
█
power switch to «0» (off)
█
press the button on the shaft to release the sole
█
Attaching the presser-foot sole
place the presser-foot sole under the shaft so that the peg sits under the
█
opening of the shaft
lower the presser-foot lifter and the foot sole will click into position
█
Changing the Presser Foot
raise the needle and presser foot
█
power switch to «0» (off)
█
Raising the Lever
raise the clamping lever
█
remove the presser foot
█
Attaching the Presser Foot
guide the foot upwards over the cone
█
press the clamping lever down
█
033301.70.04_1007_B330_B350_B380_EN
Preparation - Sewing
17